INSTRUCTIONS FOR USING NOSEFRIDA NASAL ASPIRATOR


Follow These Steps to Use Nosefrida Baby Nose Clear Nasal Aspirator 

Place your child face up on a changing table or bed. You can also hold your child, tucking their arms in while you use NoseFrida. (See example pictures here)

Place the red mouth piece of the NoseFrida into your mouth. Place the large tube at the base of your child’s nostril, using your free hand to gently secure your child’s hands or head (as shown in photos here).

Apply gentle suction to begin with, increasing suction as necessary until you see mucous in the large tube. The filter will protect you from getting anything near your own mouth. Note: There may only be a small amount of mucous drawn out of the child’s nose.

If mucous is very thick or crusty, please insert 1-2 drops of saline solution and then apply suction.

Clean NoseFrida after each use. Firstly, disassemble the device and remove and discard the hygiene filter. Wash the device with soap and warm water, rinse well and allow to dry. Replace the hygiene filter and reassemble ready for next use. Note: You should hear a click when connecting the large tube to the base of the device.

NoseFrida should ONLY be used to clean children’s and babies’ noses of mucous.



PLEASE KEEP NOSEFRIDA OUT OF REACH OF CHILDREN UNDER 3 YEARS OLD. THIS PRODUCT IS NOT A TOY.
NEVER CONNECT NOSEFRIDA TO A SUCTION MACHINE.

  1.  As voted by an expert panel sponsored by MamZiecko Magazine.